Session: CS-19-02 Fracture Toughness and Other Small Specimen Mechanical Properties (Joint with M&F)-2
Paper Number: 151653
151653 - Summary of Studies Made with Miniature C(T) Specimens for Non-Irradiated and Irradiated Materials
Abstract:
The goal of this study is to optimize the use of material in surveillance studies through miniature-sized specimens with a thickness of 3 mm, instead of the internationally recognized 4 mm. This increases the number of miniature C(T) specimens with a 3 mm of thickness extractable from a standard size 10x10x55 mm3 Charpy-V Notch specimen by 50% up to 12 pieces.
Progress in the theory of fracture mechanics has enabled the development of miniature specimen testing techniques. Miniature specimen test technique is crucial for ensuring that enough material is available to assess the effect of irradiation embrittlement on fracture toughness and ultimate strength in surveillance programmes, benefitting from the reuse aspect, and for ensuring the cost-efficiency of the testing procedure.
Miniaturization of C(T) specimens offers an option to be used in surveillance monitoring tests of reactor pressure vessel steels in nuclear power plants. The amount of the initial surveillance reference material diminishes continuously during the operational lifetime of a plant and at the same time need for the lifetime extension of operating plants is growing. Moreover, since nuclear power generates notable amount of electricity free from carbondioxide emission, the support of the lifetime extension is utmost important.
Fracture mechanical testing, finite element (FE) modelling and microstructural characterization of the fracture surface was done. Two series of miniature compact tension (C(T)) specimens with the main dimensions of width 8 mm, height 9.6 mm and thickness of 3 mm and 4 mm were tested in order to determine the reference temperature T0. Different specimen thicknesses were compared against each other by means of FE modelling, the main focus being on the comparison of 3 mm and 4 mm thick specimens’ behavior. Inclusion analysis was made with scanning electron microscope (SEM) to investigate the distribution and number of particles, and thus, observe if there are enough inclusions or carbides acting as iniative particles in view of statistics in the crack tip stress-strain field of 3 mm thick specimens.
The results of different methods are supporting each other, and the main conclusion is that the 3 mm thick miniature C(T) specimen indeed offers a solution for the challenge of decreasing amount of the reference material. The reference temperature is the same for both specimen thicknesses 3 mm and 4 mm. FE modelling showed similarity within 3 mm and 4 mm thicknesses demonstrating that the behavior between 3 mm and 4 mm specimens was the closest compared to other thicknesses. Lastly, particle analyses indicates that the number of particles is sufficiently high.
Presenting Author: Laura Sirkiä VTT Technical Research Centre of Finland Ltd
Presenting Author Biography: Laura Sirkiä, M.Sc. (Eng)
Research Scientist, PhD student
Fracture mechanics, experimental research, mechanical testing, mechanical behavior of materials (mainly metallic), material characterization, fractography, failure analysis, welding
Authors:
Laura Sirkiä VTT Technical Research Centre of Finland LtdKim Calonius VTT Technical Research Centre of Finland Ltd
Zaiqing Que VTT Technical Research Centre of Finland Ltd
Summary of Studies Made with Miniature C(T) Specimens for Non-Irradiated and Irradiated Materials
Paper Type
Technical Paper Publication