Session: OAC-04-03 Transportation of Radioactive and other Hazardous Materials III

Paper Number: 61846

Start Time: Wednesday, July 14, 2021, 05:00 PM

61846 - Thermal Analysis Evaluations Using the Dry Cask Simulator 

Different thermal analysis models were developed to simulate the dry cask simulator (DCS). The DCS is an experiment designed to simulate dry storage of a single boiling water reactor fuel assembly under a variety of heat loads and internal pressures. The DCS was set up and tested in both a vertical and horizontal configuration to determine cladding temperatures in vertical and horizontal dry cask storage systems. The models included a detailed STAR-CCM+ model with the fuel assembly geometry explicitly modeled, a porous STAR-CCM+ model with the fuel assembly geometry modeled as a porous media region with calculated effective properties, and a COBRA-SFS model. COBRA-SFS is a thermal-hydraulic code developed for steady-state and transient analysis of multi assembly spent-fuel storage and transportation systems. STAR-CCM+ is a commercial computational fluid dynamics (CFD) code. Both a detailed and porous STAR-CCM+ model were developed to look at the effective thermal conductivity (keff) approach to modeling a fuel assembly. A keff fuel model is typically modeled in CFD thermal analyses due to its significantly lower computational costs. The models were run for a combination of low and high canister pressures (100 kPa and 800 kPa) and low and high internal heat loads (0.5 kW and 5 kW). Results from all three models were compared against experimental data taken from the DCS for the peak cladding temperature (PCT) and inlet air mass flow.

Presenting Author: Sarah Suffield Pacific Northwest National Laboratory

Authors:

Sarah Suffield Pacific Northwest National Laboratory
David Richmond Pacific Northwest National Laboratory
James Fort Pacific Northwest National Laboratory